HAMILTON BEECH / PROCTOR SILEX IRONS
Can vinegar be used to clean the iron?
NO, use only clear water in the reservoir unless directed otherwise in the Use
& Care instructions.
Care and Cleaning of the Soleplate
To protect the soleplate from scratches, never iron over buttons, zippers, metal
rivets, or snaps.
To clean starch build-up and other residue from the SilverStone soleplate (feature found on selected models), unplug the iron and allow it to cool. With iron in upright position, clean the nonstick surface with a warm, sudsy cloth or sponge; wipe dry. DO NOT USE any abrasive cleaners or metal scouring pads as they may damage the nonstick surface.
To clean starch build-up and other residue from the Smooth Glide aluminum soleplate,
unplug iron and allow it to cool. With iron in upright position, clean the soleplate with
a damp cloth or sponge and a paste made of baking soda and water. DO NOT
USE abrasive cleaners or metal scouring pads as they will scratch the smooth surface.
Why does the light stay on when the unit is turned off?
The light is a power on light, and it will remain on while unit is plugged into a
power outlet. ALWAYS UNPLUG THE IRON AFTER USE.
How do I store the iron?
Store the iron in the upright position, never wrap the cord around the iron and
empty all water from the iron. It is best not to store the iron in dust prone areas such
as a laundry room where dust can settle in the opening of the water reservoir; dust will
eventually cause blockage and prevent the iron from steaming.
Why does the iron leak while using the "Blast of Steam"?
Pumping the "Blast of Steam" button will cause the chamber to flood and
the unit will leak or drip water from the vents. Press button twice, allow the blast of
steam to evaporate, then repeat.
What type of water should I use?
Tap water is recommended because it has minerals in it that actually
"season" internal parts. However, in hard water areas, use a combination of
bottle and tap water.
What do I do when the iron shuts off and will not come back on?
Some irons have an Automatic Shutoff feature. There are several ways the
automatic shutoff feature works. Try the following: